Sale!

72″ Heavy Duty Brush Cutter

$5,855.00

See additional information below for specifications.

  • Please note if you need a 24 hr notification or a 1 or 2 hr notification.

Description

FREE SHIPPING! 

72” HD Brush Cutter

3 blade, heavy duty, direct drive brush cutter for machines up to 75 HP. This cutter can only be operated in standard  flow, and is recommended for machines with 15-26 GPM.

The ES Brush Cutter has universal skid steer quick attach and is a direct drive cutter with 3-hardened steel blades. Our ¾” single fly wheel was specifically designed to maximize RPM spool up and allow for quick recovery and the highest efficiency in the market.

These are manufactured in the USA exclusively for ES Attachments. Comparable/if not BETTER than MTL, Blue Diamond, and Rut brush cutters- without the wait time, and with AMAZING customer service!

The ES HD Brush Cutter is perfect for clearing land, debris, brush, fence rows, and small to medium sized trees up to 8 inches. These are designed to be run in standard flow. If you are wanting to run this unit in high flow,  please call our office to discuss possible options.

Specs

  • 1/4” steel deck plate with extra heavy duty push bar
  • Open front face design
  • 2” drive shaft
  • 3 hardened steel blades- 5″ x 1/2″
  • Grease filled drive, with greaseable zerk fittings
  • 160 cc motor for machines 15-26 GPM
  • Steel runners on each side for ease of use over multiple terrains
  • Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
  • Weight: 1350 lbs.

These come manufactured to work on standard flow only. If you have a high flow only machine, or would be running your brush cutter on high flow only you will need to purchase our 72″ Extreme Brush cutter.

Bi-Directional operation – the ES HD Brush Cutters cut in both directions (reversible) when used with a standard flow machine.

We also have barb wire/wire wrap prevention studs on the underside of all cutters

Designed for machines with 15 – 26 GPM flow rate. If your machine has a higher GPM you will need our 72″ Extreme brush cutter. If you have any questions, please contact the office so we can discuss the best possible unit for your machine.

If you have any questions please call our office at 317-657-5017

100% made in the USA!

 

Weight 1350 lbs.
Dimensions 85 × 74 × 28 in
GPM flow rate 15 – 26
Cut capacity up to 8″
Drive shaft 2″
Deck Thickness 1/4″

Replacement blades are available, please call the office to order. When replacing blades, you must use red loctite on all bolts.

Click HERE to download the operating manual for your 72″ ES Brush Cutter.

Additional information

Weight 1350 lbs
Dimensions 85 × 74 × 28 in
GPM flow rate

16 – 27

Cut capacity

up to 7"

Weight

1336 lbs

Dimensions

84 x 74.5 x 28