72″ BRUSH CUTTERS ARE CURRENTLY ON BACKORDER UNTIL EARLY JUNE.
*PRODUCT MAY BE AVAILABLE AT A DEALERSHIP NEAR YOU – CALL TO FIND OUT: 317-657-5017*
72” Extreme Brush Cutter
This is the heaviest duty brush cutter on the market. Virtually indestructible! Cuts 8″ + trees
3 Blade, Heavy Duty, Direct Drive Brush Cutter for machines with 80+ HP
The ES Brush Cutter has universal skid steer quick attach and is a direct drive cutter with 3-hardened steel blades. Our ¾” single fly wheel was specifically designed to maximize RPM spool up and allow for quick recovery and the highest efficiency in the market.
These are manufactured in the USA exclusively for ES Attachments. Comparable/if not BETTER than MTL, Blue Diamond, and Rut brush cutters- without the wait time, and with AMAZING customer service!
The ES Extreme Brush Cutter is perfect for clearing land, debris, brush, fence rows, and medium sized trees 8 inches and up. These work only on standard flow – DO NOT USE ON HIGH FLOW!
- 1/4” steel deck plate with extra heavy duty push bar
- open front face design
- 3-1/2” drive shaft
- 3 hardened steel blades- 5″ x 1/2″
- Grease filled drive, with greaseable zerk fittings
- 160 cc motor (upgrade to 200 cc motor for high flow only machines)
- steel runners on each side for ease of use over multiple terrains
- comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
- weighs 1570 lbs
These come manufactured to work on standard flow only. If you have a high flow only machine, or would be running your brush cutter on high flow only, please select a high flow only motor that fits your GPM.
DO NOT USE ON HIGH FLOW unless you select the 200 or 250 cc motor option.
Bi-Directional operation – the ES HD Brush Cutters cut in both directions (reversible) when used with a standard flow machine. High flow machines will operate in only one direction.
We also have barb wire/wire wrap prevention studs on the underside of all cutters
Designed for machines with 16 – 26 GPM flow rate (you do not need a high flow machine for our brush cutters). If your machine has a higher GPM please select the motor based on your flow rating using the drop down menu.
100% made in the USA!
|Dimensions||85 × 74 × 28 in|
|GPM flow rate||16 – 27|
|Cut capacity||8″ and up|
|Dimensions||84 x 74.5 x 28|